Legs and both bags come in the box
Two 40-66 cm adjustable legs are included, and so are both bags - a padded table bag and a separate leg bag that holds up to two legs. One order, a complete corner.
BRAND:
Biloc
Biloc Corner IGT Multi-Function Table
SHIPS FROM KOREA · Reserved for our August 31 vessel
Reserve by August 24 to lock this vessel — 12 days left
Ready for pickup / ship-out from late September
Korea-direct · full manufacturer warranty
Reserve by August 24 to lock this vessel — 12 days left
Ready for pickup / ship-out from late September
Korea-direct · full manufacturer warranty
Expert's Recommendations
Biloc
Biloc IGT Lantern Hanger
Precio de oferta$39.00 USD
Biloc
Biloc IGT Side Hanger
Precio de ofertaDesde $25.00 USD
Biloc
Biloc Ribera IGT Multi-Function Table
Precio de oferta$131.25 USD
Precio normal$175.00 USD
Biloc Corner IGT Multi-Function Table
Precio de oferta$81.75 USD
Precio normal$109.00 USD
SHIPS FROM KOREA · Reserved for our August 31 vessel
Reserve by August 24 to lock this vessel — 12 days left
Ready for pickup / ship-out from late September
Korea-direct · full manufacturer warranty
Reserve by August 24 to lock this vessel — 12 days left
Ready for pickup / ship-out from late September
Korea-direct · full manufacturer warranty
Why the Corner
The piece that turns a row of tables into a kitchen
IGT tables extend in a straight line until the line runs out of room. The Corner is a 48.5 cm pentagon that bolts between two of them and turns the row through a right angle, so the kitchen wraps around where you stand. It arrives complete - two 40-66 cm adjustable legs, a padded table bag and a leg bag are all in the box. Every edge carries standardised IGT side holes, so hangers, baskets and lantern arms mount on the corner itself. And packed, it is a 5 cm slab in its own bag.
One corner, complete
What is in the box, and what it unlocks
Turns a straight kitchen into a corner one
The 48.5 cm pentagon bolts between two IGT tables and swings the line through a right angle, so the kitchen wraps around you instead of running away sideways.
Six heights, 40 to 66 cm
The included legs set to six fixed heights from 40 to 66 cm, so the corner meets a Biloc Ribera, a Biloc Octa or another IGT table at a shared height. Fit taller legs and the whole run goes up together.
Standardised IGT side holes
Every edge is punched with standard IGT side holes, so side hangers, baskets, lantern arms and further tables mount straight onto the corner itself.
201 stainless, two finishes
The top is 201 stainless with a hairline surface. Silver keeps the bare hairline; Black adds a matte-black PVD coat over it. Legs are 304 stainless.
Packs 5 cm flat
Legs off, the table is a 51 x 51 x 5 cm slab that slides into its padded bag - flat enough to stand behind a seat or lie under the rest of the load.
Around the corner, or down the line
At the corner
Two tables become one L-shaped kitchen
Bolt it between two IGT tables and the line turns 90 degrees - burner on one wing, prep on the other, and the corner surface in the middle where both are in reach. It joins a Biloc Ribera, a Biloc Octa or another IGT table at whatever height you run.
In line
Or straight on the end, as one more surface
The same side holes bolt it straight onto the end of a run, where it works as an end-cap extension on its two included legs. Either way the IGT holes on its edges keep carrying gear.
Specifications
Table
48.5 x 48.5 cm (19.1 x 19.1 in)
Height
40-66 cm in 6 steps (15.7-26 in) - 40 / 45 / 50 / 55 / 60 / 66 cm
Packed
51 x 51 x 5 cm (20.1 x 20.1 x 2.0 in)
Weight
3.6 kg (7.9 lb)
Specifications
- Table
- 48.5 x 48.5 cm (19.1 x 19.1 in)
- Height
- 40-66 cm in 6 steps (15.7-26 in) - 40 / 45 / 50 / 55 / 60 / 66 cm
- Packed
- 51 x 51 x 5 cm (20.1 x 20.1 x 2.0 in)
- Weight
- 3.6 kg (7.9 lb)
- Load capacity
- 30 kg (66 lb) distributed
- Included legs
- 2 adjustable legs, 40-66 cm in 6 steps, levelling bolt at each foot
- Materials
- 201 stainless steel top, 304 stainless steel legs; polyester bags. Black is finished with matte-black PVD over a hairline surface
- IGT interface
- Standardised IGT side holes punched along the plate edges
- Joins with
- Biloc Ribera, Biloc Octa and other IGT tables - matched by height on the included 40-66 cm legs
- In the box
- Corner table, 2 adjustable legs (40-66 cm), table bag, leg bag (holds up to 2 legs)
Compatibility
- Biloc Ribera IGT Multi-Function Table Joins across their full 40-66 cm height range.
- Biloc Octa IGT Fire Ring Table Matched by height - taller legs take both tables higher.
- Standard-spec IGT tables (other brands) Bolts on through the standard side-hole pattern. Hole geometry differs between makers, so the joined tops can sit up to about 5-6 mm apart in height at the seam.
What this is, and what it is not
A corner join for an IGT kitchen
It bolts between IGT tables - or onto the end of a run - and turns the line through a right angle. Two 40-66 cm adjustable legs, a padded table bag and a leg bag all come in the box.
Not a standalone dining table
Two legs are included because the table it joins normally carries the other side. The tables, burners, baskets and lantern arms in our photos are separate purchases.
Bolt on, twist-lock the legs
Bolt it to the host table through the standard IGT side holes, set the two legs to the height that matches, and trim level with the bolt at each foot.
Standard IGT holes, one honest fit note
Joins a Biloc Ribera, a Biloc Octa or another IGT table at a shared height. On some third-party IGT tables the joined tops can sit about 5-6 mm apart at the seam, because hole geometry differs between makers.
Questions
Before you bolt it on
What comes in the box?
The corner table, two adjustable legs (40-66 cm), a padded table bag and a leg bag that holds up to two legs. The tables, burners, baskets and lantern arms in our photos are separate purchases.
Does it work with other brands' IGT tables?
Yes - it bolts on through the standard IGT side-hole pattern. One honest note from the maker: hole geometry differs between brands, so on some third-party tables the joined tops can sit about 5-6 mm apart in height at the seam.
Which Biloc tables does it pair with?
A Biloc Ribera, a Biloc Octa and other IGT tables that use the standard side-hole pattern. The included legs cover six fixed heights from 40 to 66 cm, and taller legs take the run higher if you want to work standing.
How do the heights work?
The two included legs set to six fixed heights - 40, 45, 50, 55, 60 and 66 cm - with a levelling bolt at each foot for fine adjustment on uneven ground.
How does it pack?
Legs off, the top is a 51 x 51 x 5 cm slab. It ships with its own padded table bag, and the legs travel in their separate leg bag.
Can accessories mount on the corner itself?
Yes. The edges carry the same standardised IGT side holes as the tables it joins, so side hangers, wire baskets and lantern arms mount directly on the corner.
Why we carry it.
Straight extensions are easy to find; the corner is the piece that was missing. A camp kitchen you can stand inside of - burner left, prep right - beats a long counter you walk along, and this is the part that makes that shape possible. It ships with its legs and both bags, which is not a given at this price, and the side holes mean the corner itself keeps working as mounting real estate rather than being dead space between two tables.
Kevin G.·Founder · BigTent Outdoors
SHIPPING
Shipping & timing.
Three ways to get it.
Express shipping
Air freight + ground
Recommended if you have a specific trip coming up and need it faster. Cost is calculated by package weight.
2-4 weeks
Standard shipping
Ocean freight + ground
Lower cost. Best when you're not in a rush. All duties included, no surprises at delivery.
5-8 weeks
Local shipping
Ground
Ships from our BC warehouse, Canada — already in North America, so there's no overseas leg and no import wait. Orders within North America arrive with no added duties or customs fees. For destinations outside North America, the recipient is responsible for any duties or customs charges on arrival.
3–7 business days